Full VPN Setup For Windows 8: L2TP Protocol

This article explains how to set up L2TP VPN protocol connection on a Windows 8 PC.

Before we begin, you need to Activate your VPN account from your Getflix > Manage > VPN panel. In order to do this, log into your https://www.getflix.com.au/manage/vpn.

Setting up your Windows 8 PC for L2TP VPN Connection:

STEP #1

Right click on Network icon and choose Open Network and Sharing Center.

STEP #2

Click on the Set up a new connection or network link.

STEP #3

Select the Connect to a workplace option, then click Next.

STEP #4

Choose Use my Internet connection (VPN).

STEP #5

Using a web browser, navigate to the " Getflix VPN Server Network List" section on the Getflix Knowledge Base website. Locate your VPN Server that you would like to get connected to.

In the Internet Address box, enter the address of the VPN server you would like to get connected to.
In the Destination Name box, enter "Getflix VPN". Here, you can enter more friendly name depending of the servers you want to set up, i.e.; "Getflix Los Angeles", "Getflix Toronto", "Getflix Sydney".
Select the "Don't connect now; just set it up so I can connect later" option.

Click " Create" to continue.

STEP #6

You will see your new connection in Networks.

STEP #7

From Network and Sharing Center select Change adapter settings from the left page.

STEP #8

Find your Destination Name which you defined in the previous setup sections and right click then select Properties. For example find "Getflix VPN".

STEP #9

Select Security from tabs. Change the Type of VPN to Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec). Also make sure to have Microsoft CHAP Version 2 are selected.

Then Click Advanced Settings.

STEP #10

Click Use pre-shared key for authentication and enter following as Key:

s3CuREpaSs412

Click OK.

STEP #11

Click on the Network Icon in your task bar right side, next to clock. Click on the setup name you created and click Connect.

STEP #12

Using a web browser, navigate to the " Manage > VPN" section in your Getflix Management Console. Then, using the details on that page, fill out the form as follows:

In the User name box, enter the value displayed next to "VPN Username".

In the Password box, enter the value displayed nest to "VPN Password".

Leave domain empty.

Click OK. After the connection, you should now see the VPN connection successfully established.

You are now connected and all your internet traffic is Encrypted & Secured!

You can connect and disconnect at anytime using the network menu in the system tray. Simply click on the network icon in the system tray and Networks list will show up right side of your Windows 8 screen. If the VPN connection fails, see the troubleshooting tips below.

Troubleshooting

There are several reasons that the VPN connection will fail. Here are some things to check.

L2TP protocol might be blocked in your Internet Service Provider connection. Set up the SSTP VPN connection. SSTP uses port 443 and it's not possible to be blocked by ISPs. SSTP also provides better encryption but it's little slower. SSTP is not supported by every Getflix VPN server. So, please make sure to select proper server in your setup.

If the VPN connection still fails, please log a ticket with our support team for assistance.