Full VPN Setup For Windows 7: L2TP Protocol

This article explains how to set up L2TP VPN protocol connection on a Windows 7 PC.

Before we begin, you need to Activate your VPN account from your  Getflix > Manage > VPN panel. In order to do this, log into your https://www.getflix.com.au/manage/vpn

Setting up your Windows 7 PC for VPN:

STEP #1

Click on the  Windows Start button and type "network" in the search box. When the results appear, click on the "Network and Sharing Center" link.

STEP #2

Click on the " Set up a new connection or network" link.

STEP #3

Select the " Connect to a workplace" option, then click "Next".

STEP #4

Select the " No, create a new connection" option, then click "Next".

STEP #5

Click the " Use my Internet connection (VPN)" option.

STEP #6

Using a web browser, navigate to the " Getflix VPN Server Network List" section on the Getflix Knowledge Base website. Locate your VPN Server that you would like to get connected to.

  • In the Internet Address box, enter the address of the VPN server you would like to get connected to.
  • In the Destination Name box, enter "Getflix VPN". Here you can enter more friendly name depending of the servers you want to set up, i.e.; "Getflix Los Angeles", "Getflix Toronto", "Getflix Sydney".
  • Select the "Don't connect now; just set it up so I can connect later" option.

Click " Next" to continue.

STEP #7

Using a web browser, navigate to the " Manage > VPN" section in your Getflix Management Console. Then, using the details on that page, fill out the form as follows:

  • In the User name box, enter the value displayed next to "VPN Username".
  • In the Password box, enter the value displayed nest to "VPN Password".
  • Select the "Remember this password" option.

Click on the " Create" button.

STEP #8

Don't click "Connect now", click the "Close" button instead. 

STEP #9

Go back to the "Network and Sharing Center" screen and select the " Connect to a network" option.

STEP #10

In the bottom corner of your screen, click on " Connect" next to the "Getflix VPN" item.

STEP #11

Click on the " Properties" button.

STEP #12

On the  Security tab, change the Type of VPN option to "Layer 2 Tunneling Protocol with IPsec (L2TP/IPSec)".

Make sure the "Microsoft CHAP Version 2 (MS-CHAP v2)" option is both selected and the the other options are not selected.

STEP #13

Click  Use pre-shared key for authentication and enter following as Key:

s3CuREpaSs412

and  Click OK.

STEP #14

On the  Networking tab, ensure ONLY the "Internet Protocol Version 4 (TCP/IPv4)" item is enabled (be sure to un-tick the others), then Click "OK" button.

STEP #15

You can now click the " Connect" button and the VPN connection should be established.

You are now connected and all your internet traffic is Encrypted & Secured!

You can connect and disconnect at anytime using the network menu in the system tray. If the VPN connection fails, see the troubleshooting tips below.

Troubleshooting

There are several reasons that the VPN connection will fail. Here are some things to check. 

  • L2TP protocol might be blocked in your Internet Service Provider connection. Try to setup the SSTP VPN connection. SSTP uses port 443 which is the same port of HTTPS websites and can't be blocked. SSTP also provides better encryption and security comparing to L2TP, but SSTP is little slower than L2TP.


If the VPN connection still fails, please log a ticket with our support team for assistance.

Still need help? Contact Us Contact Us